- Print transfers have a full white under base. This means that you can use these transfers on ANY COLORED garment and the design will show full color due to DTF prints the color white!!!
- Print transfers MUST be heat pressed on the material. You CANNOT use an iron on these transfers.
Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.
With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.
Our DTF transfer is made using real textile inks which are water-based ( not plastisol) that are printed onto clear PET transfer film. These prints do use white inks which places a white base to allow pressing onto any color and/or type of garment with a less expensive price point than HTV , softer hand, more vibrant colors due to printing digitally , a great stretch ability. The best comparison in “feel” would be comparable to High Heat transfers that many are familiar with.
- Turn your press to 320 degrees
- Press your garment for 8 seconds to remove the moisture
- Place the print on the shirt and press for 20 seconds with heat press
- Take off press and instantly press hard over the design with a rubbing motion
- Let Fully cool completely before peeling
- Peel cover-off design
- Place the garment with a Teflon sheet on the garment and repress for 8 seconds
- This is a cold peel
